Conductivity analyzers for liquid C-31хх series (analyzers) are designed for use in various
industries as salinity meters and concentration meters. Analyzers can also be used to determine the quality
of pure and ultra-pure water in water treatment systems in the power, electronic, pharmaceutical, food
processing and other industries. A special group of analyzers is designed for use in nuclear power plants
(NPP) and nuclear industry facilities.
pH-meters of рН-41хх series are designed for potentiometric analysis of liquids in a variety of
industries. A special group of analyzers is designed for use in nuclear power plants (NPP) and
nuclear industry facilities.
Holders (mounting kits) for sensors and electrodes
Holders are intended for installation in them pH- or ORP-
electrodes, sensors of specific electrical conductivity, as well as other
types of sensors, electrodes, etc., designed to measure physicochemical
parameters of aqueous media
The primary converter (transducer) of the "D", "S", "I" versions
is being installed on the holder. If necessary, the primary transducer
can be installed separately from the holder with the aid of an
attachment unit.The length of the communication line between the
sensor (electrode) and transducer is change for each type of analyzer.
Also, option is possible without a primary transducer. In this case, the
sensor is connected directly to the measuring instrument.
Analyzers of dissolved oxygen, sodium, turbidity, hydropanels, ionomers
Measurement of dissolved oxygen concentration and temperature in aqueous solutions, conversion of measured parameters to standard analog DC signals
with digital indication, graphic display, data exchange with a computer via RS-485, archiving and alarm signaling.
Hydropanel HP-5101 is designed for preliminary preparation of controlled
liquid: setting the nominal value and stabilize the flow through measuring cell,
in which mounted the amperometric sensor (with built-in temperature sensor);
to ensure noise immunity of the measurements; also to calibration of the
sensor by air or with calibration gas mixture.
Sodium analyzer SA-7101 (analyzer) is designed for measuring activity level (pNa) and mass concentration (cNa)
of sodium ions in chemically demineralized water, high pressure boilers steam condensate and turbines and
also for controlling of quality of H+ cation-exchange filters.
The analyzer is used to control the process of chemical water treatment in power engineering: heat
power plants, NPP and process water treatment plants.
Hydropanel HP-7101 for sodium analyser is designed for preconditioning
analyzed liquid: special Fittings stabilize the flow through the measuring cell, in
which are placed a combined pH electrode with a temperature sensor and
ion-selective pNa-electrode, providing noise immunity measurement, addition of
an alkalizing agent in analyzed liquid, and for setting the reference analyzer
solutions.
The hydropanel is designed to measure the
turbidity of drinking water, there are turbidity analyzer TU-8122, a flow cell with a turbidity
sensor, a water flow sensor, as well as pipes and auxiliary equipment for supply and discharge of
water in normal mode and during maintenance.
Industrial ionometer AI-9102 (analyzer) is designed to
measure the activity index (pX) and the mass concentration (cX) of one-, divalent ions, the activity of hydrogen ions
(pH), temperature (T) and oxidation-reduction potential (ORP) in the analyzed liquid.