Description
C-3102
Conductivity analyzer
C-3110 (Ех)
Conductivity meter-transmitter with a contact sensor
C-3130 (Ех)
Conductivity meter-transmitter with a inductive sensor
C-3104
Benchtop conductometer
Quantity of measuring channels
1
Measuring ranges 1)
from 0..10 to 0..20 mS/cm
from 0..1 to 0..1000 μS/cm
from 0..1 to 0..100 mS/cm
concentration of the solutions (H2SO4, HCl, HNO3, NaOH, KOH, NaCl, etc.)
from 0..10 to 0..1000 μS/cm
concentration of the solutions (H2SO4, HCl, HNO3, NaOH, KOH, NaCl)
from 0..10 μs/cm to 0..20 mS/cm
with measuring range automaticselection
Quantity of SEC measuring ranges for one modification
4
3
-
Range adjustment possibility (according to output signal)
No
Yes
SEC measurement basic percentage error, %
2 or 4
2
12)
Linearization
The primary transducer (sensor)/purpose
passive sensor/flow-submersible
active/flow or submersible
active sensor, flow type or submersible
passive sensor with
1 m cable/submersible
PT enclosure type (IP65)
S, I (wall mounted)
Benchtop
Temperature and pressure limits
(5..95)°С, 1,6 MPa
(5...80)°С or (5...100)°С; P<1,6 MPa
(5...150)°С4); P<0,6 MPa
(5...90)°С; 0,1 MPa
Connection between PT and MI / line length
3 wires / up to 10 m
Measuring instrument
panel mounted - 48х96mm
Benchtop - 190х142х92mm,
IP54 (on the front panel)
Output signals
(0...5), (4...20) mA;
2 relays
(0...5), (0...20), (4...20) mA orRS-485 (RS-232), Modbus protocol (RTU, ASCII)
(0...5), (0...20), (4...20) mA orRS-485 (RS-232), Modbus protocol
(RTU, ASCII)
RS-485 (RS-232), Modbus protocol
Alarm system
1 SEC set point1 temperature set pointorSEC set points
N/A
Data display
Digital 4 digits
digital, graphics, archive
Features
Explosion protection marking 1ExdIIBT6 X
Notes: