C-3102 analyzer is designed for measurement and monitoring of specific
electric conductivity (SEC) or concentration of solutions.
The analyzer provides a digital display of SEC values and temperature, their conversion into proportional values of
uniform DC output signals, alarming when the measured parameters are out of the specified values.
The instrument consists of a sensor and measuring instrument (MI).
Application: water treatment. In the dairy and brewing industry, it can be used as an indicator of phase separation: water - milk, water - washing
(0...10); (0...100); (0...1000) μs/cm
(0...5); (0...50); (0...500) mg/l NaCl
(0...5) до (0...20) mS/cm
2,0 or 4,0%
Reference temperature and temperature
coefficient of thermal compensation
Viscosity of the analyzed liquid
< 0,2 Pa·sec
Pressure of analysing liquid
max 1,6 MPa
Climatic version sensors
Resistance of the sensor to mechanical influences in accordance with GOST R 52931
< 0,1 kg
LED 7 segm 4 digit
green or red
on the SEC and temperature or two on SEC
(0...5) mA or (4...20) mA (optional)
- discrete (2 relays)
240V, 3 A
3-wire line length from the sensor to the MI
max 10 m
~220 ВV, 50 Hz
< 7 VA
Climatic version MI
Resistance to mechanical influences in accordance with GOST R 52931 (Rus)
Enclosure material MI
< 0,6 kg
The reference temperature (°C) and the temperature coefficient (% per °C) are set programmatically.
The measuring device has a galvanic isolation between the input and the output.
The upper limit of the temperature of the liquid to be analyzed is determined depending on the specific environment.